#LXMacro#
select.expand
tool.set *.bevel on
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel shift 0.0
   tool.setAttr poly.bevel inset 0.0
#Command Block End:  ToolAdjustment
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset 0.0
   tool.setAttr poly.bevel shift 0.16
#Command Block End:  ToolAdjustment
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset 0.0392
   tool.setAttr poly.bevel shift 0.16
#Command Block End:  ToolAdjustment
tool.doApply
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset 0.0
   tool.setAttr poly.bevel shift 0.0
#Command Block End:  ToolAdjustment
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset 0.0
   tool.setAttr poly.bevel shift 0.108
#Command Block End:  ToolAdjustment
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset 0.0108
   tool.setAttr poly.bevel shift 0.108
#Command Block End:  ToolAdjustment
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset 0.0108
   tool.setAttr poly.bevel shift -0.022
#Command Block End:  ToolAdjustment
tool.doApply
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset 0.0
   tool.setAttr poly.bevel shift 0.0
#Command Block End:  ToolAdjustment
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset 0.0
   tool.setAttr poly.bevel shift 0.104
#Command Block End:  ToolAdjustment
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset -0.0068
   tool.setAttr poly.bevel shift 0.104
#Command Block End:  ToolAdjustment
tool.doApply
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset 0.0
   tool.setAttr poly.bevel shift 0.0
#Command Block End:  ToolAdjustment
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset 0.0
   tool.setAttr poly.bevel shift 0.072
#Command Block End:  ToolAdjustment
#Command Block Begin:  ToolAdjustment
   tool.setAttr poly.bevel inset 0.0116
   tool.setAttr poly.bevel shift 0.072
#Command Block End:  ToolAdjustment
tool.doApply
tool.set poly.bevel off 0